Pole Banner Set
"Light pole" or "street pole banners" have high visual impact and citywide exposure. Take your message outdoors with these double sided graphics. Available in 18, 24 or 30 inches wide and up to 96 inches tall. We print in full color a single piece of vinyl front and back. Finished banners include 2" inch pole pockets and a grommet at each corner seam to keep your product in place. Please check out our 18 oz banner product if your project requires custom finishing options.
- 18 oz matte blockout banner
- Full color UV printed
- Double sided
- 2" Pole pockets top and bottom
- Fiberglass street pole hardware kits optional
- Banner printed front and back - Sides are unhemmed
| Hardware | Banner Only or Banner + 18" Hardware or Banner + 24" Hardware or Banner + 30" Hardware |
| Dimensions | 18" x 24" or 18" x 30" or 18" x 36" or 18" x 42" or 18" x 48" or 18" x 54" or 18" x 60" or 18" x 72" or 18" x 84" or 18" x 96" or 24" x 24" or 24" x 30" or 24" x 36" or 24" x 42" or 24" x 48" or 24" x 54" or 24" x 60" or 24" x 72" or 24" x 84" or 24" x 96" or 30" x 24" or 30" x 30" or 30" x 36" or 30" x 42" or 30" x 48" or 30" x 54" or 30" x 60" or 30" x 72" or 30" x 84" or 30" x 96" |
| Windslits | No Windslits or 1 or 2 or 3 or 4 or 5 or 6 or 7 or 8 or 9 or 10 |
Artwork File Setup
- Accepted File Formats: JPEG or PDF (single page only)
- Color Space: CMYK
- Resolution: 150dpi for raster images (More than enough for large format)
- Max File Upload Size: 20MB
- Submit artwork built to ordered size - Scaled artwork is automatically detected and fit to order
- Do not include crop marks or bleeds
- Double sided products will be uploaded as two separate files unless otherwise specified in the artwork template
A: We suggest all grommets be used during installation to prevent damages to the banner.
A: Please see our recommendation below:
- 2” pole pocket accommodates 1” diameter pole and under
- 3” pole pocket accommodates 1.5” diameter pole and under
- 4” pole pocket accommodates 2” diameter pole and under
A: Your submitted graphic should fit the dimensions of the print you ordered. There is no additional bleed required. There will be a hemline across the graphic, it will be 2", 3", or 4" from the edge of the graphic depending on what sized pole pocket you order.
